بيت > أخبار > أخبار الصناعة>

Custom One-Piece Gift Boxes: How to Brief Structure and Fit

Custom One-Piece Gift Boxes: How to Brief Structure and Fit
18 Nov, 2026

You’ve got the sample in front of you, empty and tidy, then the product goes in and the lid will not sit down, because the brief only had a photo and an outside size. For a one-piece gift box, get the structure, the opening, and the product’s length, width and height into the first email, before a blank is cut.

HangPeng makes custom one-piece gift boxes in Yiwu, and we work from that kind of brief. The photo still helps. It does not replace those three points.

Concept schematic of a custom one-piece gift box: one board folding into a closed box, panel arrows, example only, not a production specification
Concept schematic, not a production specification. Example fold only; panel shapes and closures are not a factory standard and are not to scale

Start with one board, not a separate lid and base

Call it one-piece, one board, or a fold-up box: what we need to know is whether the lid, the walls and the base come off a single die-cut blank and fold up together. A rigid lid-and-base box is a different job. The lid is made as one part, the base as another, and later the two get paired.

On our garment box page we already list folding airplane boxes among the styles shown there. That one is familiar: one blank, folded up, tucked or locked shut. Buyers sometimes call it a mailer-style fold. Other one-piece folds exist, so we don’t read that page as a lock catalogue. Got a box you already like? Photograph it open and closed and send that. If the closure has no name you trust, skip the name. Say how it opens, or let the picture carry it.

Already sure you want a separate lid and base? Stop on this article and use our comparison of rigid and folding gift boxes instead. What follows is only the one-piece brief.

Those folding-box gsm ranges look handy, and they don’t belong on a one-piece brief. The quote sets the board, and the sample confirms it, for the structure you actually send.

Say which way the box opens

Got a physical sample of the structure you want? Skip the list below. Photograph it open and closed, add the product sizes, and send both.

No sample yet? Put these in the first email:

  • Which face opens: the top, the front, or an end

  • How it closes, in plain words, or with a photo: a tuck, a lock, a tab you can show us

  • Whether the packed box has to stand on a shelf, sit in a shipper, or do both

  • Whether the boxes are to arrive folded flat, so your team forms them at the packing table, or arrive already formed

The opening changes the fit, sometimes in a way a drawing does not show. An item that drops in from the top may hit a front flap that folds the other way. And a lock under the product is a different brief from a lock on the lid. Tell us the opening first; we check it on the sample.

Measure the product, then the box

Length, width and height of the product go in the quote request, and of its own pack if it has one. Add the weight. Add which way the item sits. A standing bottle and a bottle on its side want different openings; a rendering is a poor place to guess that.

Leave room around the product. The extra space depends on the item, on any inner pack, and on how the box opens, so we set that clearance on the sample.

Concept schematic showing how to measure product length, width and height for a one-piece gift box and where the opening is marked; clearance is set on the sample
Concept schematic, not a production specification. No box size, board weight or opening style is specified; clearance is confirmed on the sample; not to scale

Already stuck with a maximum outside size, because of a shelf or a shipper or a carton you already use? Put the limit in the same email. Then the quote can say if the structure fits, or if the pack has to change. Hang-tags, belly bands, sleeves, tissue that stays on: they add bulk. Measure the packed item you will actually put in, not an early sketch.

People forget the weight, then have to revisit it after a blank is already cut. A folded scarf and a glass jar do not load a lock the same way. Put the weight in; the quote can say what that structure is able to take.

If the product will rattle or roll, and you want a tray, sponge or raffia, mention that in the same note. We make those inserts in-house. Size and fit wait for the sample.

Send artwork with the brief if you have it, even rough. On a one-piece blank a logo sometimes sits across a fold, and a 3D picture of the closed box hides that. Tell us which face the artwork belongs to. We’ll look at it on the actual blank, not only on the rendering.

Flat shipment or formed shipment

A lot of one-piece boxes travel as flat blanks and get folded when the goods are packed. That is a packing choice, and you need to say it. It is not a freight-saving number.

If your team will form the boxes, say so. We’ll use the sample to see whether the fold is practical at a packing table. If you want them to arrive already formed, say that instead. And tell us how the packed box has to travel after that. A lock that holds on a desk may shift once it is in a carton.

Check the sample with the real product

For an ordinary gift box we usually quote a custom sample in 7 to 10 days and bulk production in 15 to 20 days after approval, depending on quantity. A one-piece structure may need a different window, so we’ll confirm both timings on the quote once the brief is clear. Prices are EXW Yiwu.

When the sample arrives, pack the real product, not paper stand-ins. Open and close the box a few times. See whether the item goes in and comes out without a shove, and whether the closure still lines up after that. Look at the corners; a one-piece fold often shows a tight or uneven gap there first. If the box has to travel, pack one sample the way the shipment will be packed and see what moves. If the fit is tight, loose, or awkward, change it now, not after bulk has started.

What to send for a custom one-piece gift box quote

Custom one-piece gift boxes start at 1,000 pieces per order. The sample fee on a gift box is refunded once that order reaches 1,000 pieces.

Send us:

  • Length, width, height and weight of the product, plus a photo

  • How the box opens, or a photo or drawing of a structure you want to follow

  • Whether the boxes ship flat or already formed

  • Any limit on the overall box size

  • Artwork, or a brand direction

  • Quantity and the date you need the goods in hand

تواصل معنا عبر البريد الإلكتروني aaron@yc-gift.com أو pengtaolou97@gmail.com، أو عبر واتساب على الرقم +86 130 5899 5000، أو استخدم موقعنا الإلكتروني. صفحة الاتصال. Other box styles are in our box range.

التعليمات

Is a folding airplane box the only one-piece structure?

No. A folding airplane box is one familiar form we already list on our garment box page. Other one-piece folds exist. If you have a different structure in mind, send a photo or a drawing rather than trying to match a style name.

What if I only have the product and no box to copy?

Start there. Sizes, weight, a product photo, and a rough note on how you want it to open are enough to get a quote moving. If you once liked a box you saw in a shop or in a photo, send that picture too, open and closed if you can get both. We can work from that even when you don’t have the box in hand.

`
منتجات
جهات الاتصال
واتساب
بريد إلكتروني